BMW
VOLKSWAGEN / AUDI / SKODA / SEAT
MERCEDES
Peugeot / Citroën
Renault 
Vauxhall
SUZUKI
Honda
Mazda
FORD
Turbo kit UNIVERSAL
Hybrid Turbo
GARRETT performance turbo
Performance turbo 
Turbo performance GTX Gen2
HOLSET performance turbo
Turbo Performance Borg Warner EFR
Heat protection
Fittings
Wastegate
Decompression plate
Turbo accessories
V-band
To weld
Band
To weld
Diameter 89mm - 3.5"
Heat protection
Specific Downpipe
Exhaust accessories
Turbo Manifold
Air Filters
Intake manifold
Pipercross Filters
Blow off valve
Intercooler
Piping kit
Air circuit accessories
Silicon hose
FORGE
Oil coolers
AN / DASH Fittings
Sandwich plates
Braided hoses
Oil catch tanks
OILING
AN / DASH Fittings
Injectors
Fuel pumps
Fueling accessories
Manomètres ProSport Crystal blue
SUPREME Prosport Gauge 
JDM 60mm ProSport Gauge
JDM ProSport Gauge 52mm
LCD ProSport Gauge
White/Green EVO ProSport Gauge
Blue/Red EVO ProSport Gauge
White ProSport Gauge
Ghost gauge
Grey gauge
Boost Controller
Knock detector (detonation)
Gauge accessories
Jantes JR
Jantes CVR
Accessoires
GTX2860R Gen2 - Ball bearing
€720.00
Tax included
Shipping 24/48h
TURBOCHARGER GTX2860R T25 AR64 or AR86 Output 5 holes BALL BEARING
allows a maximum power of 350HP (from 200 to 350HP)
GTX2860R Gen 2 Turbo with Ball Bearings
Internal wastegate
Greatly improves the spool thanks to its GEN 2 compressor housing compared to an journal bearing turbo.
Supports up to 350hp (from 200 to 350hp).
Exhaust Manifold Flange Size:
T2 / T25 Flange (73x40mm)
Turbine housing outlet: 5-bolt type T25 T28 same as Garrett
Compressor wheel, inducer/exducer: 46/60mm
Turbine, inducer/exducer: 54/47mm
Dual-row ceramic ball bearings
Exhaust Housing (Turbine):
A/R.64 / AR64 / A/R0.64
or
A/R.86 / AR86 / A/R0.86
Oil lubrication and water cooling.
Note: Rotate the exhaust and intake housings to correctly position the turbo in your engine.
GTX2860RG2
You might also like
TURBOCHARGER GTX2860R T25 AR64 or AR86 Output 5 holes BALL BEARING
allows a maximum power of 350HP (from 200 to 350HP)