Installation of a tuneable board on your OEM Ecu
Plug'n'Play - Bosch M7.4.4 / Bosch Me7.4.4
Programmable ECU dedicated to the PSA Group type TU 8s and Tu 16s 106, 206, 306 , 307, Partner, C2, C3, C4, C4 Picasso, Saxo, Xsara, Xsara Picasso, Berlingo
Engines: TU1JP, TU5JP, TU5JP4
1.1L 8v, 1.6L 8v , 1.6L 16v
It is fitted in place of your ECU and controls all the original ancillaries.
- M7.4.4 for the cable throttle version ("IAC")
- ME7.4.4 for the motorised throttle body version ("ETB")
We work on your own ECU, send us your ECU, within one month we'll send you back your modified and fully programmable ECU, delivered with a base map so that you can start the vehicle to begin tuning.
This engine management system is ideal for all engine preparations, whether for naturally-aspirated or turbo conversion. It installs directly in place of the original equipment, while taking care of all the original ancillaries. It is therefore perfectly suited to simplified wiring harnesses or vehicles intended for competition.
Main features:
- MUX CAN-bus compatible with MUX PSA transmission.
- Management of two engine fan speeds.
- Reads the original lambda sensor and is compatible with any wideband AFR controller.
- Boost by gear management for turbo conversion.
- 4 independent injector drivers.
- Twin-static ignition.
- Control of stepper idle valve (IAC) or complete motorised throttle valve (ETB).
- Power steering pressure switch.
- Integrated Bluetooth connection.
- High-performance ARM processor.
Advanced features:
- Launch control.
- Rolling launch.
- Bi-carto.
- Hard cut.
- Pop and bang.
- Anti-lag system (ALS).
- Boost by gear.
For optimised E85 installation, add a Flex Fuel sensor.
Please note: with version ME7.4.4, the cruise control will no longer be functional.
Everything is accessible without limits via the TunersTudio software.
The programmable card is installed in your ECU. At the time of purchase, we will give you the address to send your ECU for conversion. Allow around 15 working days for conversion.
Installation of a tuneable board on your OEM Ecu
Plug'n'Play - Bosch M7.4.4 / Bosch Me7.4.4