XU10J4RS - Standalone ECU - Peugeot/Citroën

Standalone ECU  dedicated to Peugeot/Citroën with XU10J4RS

We work on your own ECU. Send us your ECU and within a month we will return it to you modified and fully programmable, delivered with a basic MAP to start the vehicle and begin adjustments.

Ideal for controlling all the parameters of your turbo conversion, not to mention naturally aspirated engine tuning.

It is installed in place of your ECU, controlling all the original ancillaries.  (air conditioning, bort panel, correction of the idle valve according to the DA pressure, double relay,. ..)

Piloting the pencil coils sequentially.

Piloting the injectors sequentially and phased with an advance table.

Formatting of TDC and AAC sensors.

Full control with micro-motor idle regulation.

control of the canister purge.

Throttle heating.

Dual relay control.

Rev counter output.

Bi-carto tilting onto the Diag socket with a simple switch.

Control of all probes.

Checking the steering pressure switch.

Barometric correction.

boost by gear.

flexfuel sensor input.

Wideband AFR compatible (via a controller)

And all the advantages of efficient programmable management giving access to an infinite number of settings and engine developments.

Communication via USB port included.

Communication by BLUETOOTH included.

Compatible for any atmospheric version

Compatible for Turbo mounting by replacing the original MAP sensor with a THP MAP

Everything is accessible without limits through the TunerStudio software

The installation of the programmable card is carried out in your calculator. When you purchase we will give you the address to send your calculator for transformation.